Differences

This shows you the differences between two versions of the page.

--- gp_simulator:gp-simulator [2019/02/26 15:48]
yasko
+++ gp_simulator:gp-simulator [2019/03/20 07:58] (current)
admin [Evaluation Kit]
@@ Line 1: / Line 1: @@
 =====GP-Simulator=====
-GP-Simulator is a cost-effective solution for the simulation of GPS L1 signals with live sky synchronization and signal distortion reproduction within the framework of user-defined test scenarios.
+GP-Simulator is a cost-effective solution for simulation of GPS L1 signals with live sky synchronization and user-defined modification of key parameters (such as power, pseudorange, Doppler, and navigation message content) for emulating controlled spoofing attacks.
-GP-Simulator is designed for testing and investigating susceptibility points of GNSS dependant entities to spoofing and jamming interferences.
+GP-Simulator is designed for testing and investigating vulnerability points of GNSS dependant entities to spoofing and jamming.
 \\
@@ Line 7: / Line 8: @@
   * [[https://www.ettus.com/product/category/USRP-Bus-Series|Ettus Research USRP Bus Series]] with GPSDO;
   * [[https://www.u-blox.com/en/product/evk-8evk-m8|Ublox M8T GNSS receiver]] for live sky synchronization;
-  * Capable computer with an internet connection;
+  * A computer device with capable hardware and internet connection;
-  * External high quality 10 MHz reference source (for using radiated test);\\
+  * External high quality 10 MHz reference source (for using radiated tests).\\
 \\
-GP-Simulator provides clean and user-friendly interface, taking care of all complex computing processes in the backend.
+GP-Simulator provides a clean and user-friendly interface, taking care of all complex computing processes in the backend.
 {{:gp_simulator:gp-simulator_welcome.png}}
@@ Line 31: / Line 32: @@
 ====Key Features====
-  * Allows you to simulate GPS L1 spoofer in synchronous and asynchronous modes for developing the corresponding protection methods and detecting the equipment susceptible to attacks;
+  * Allows you to simulate a GPS L1 spoofer in synchronous and asynchronous modes for developing the corresponding protection methods and detecting potential vulnerabilities of the equipment to spoofing and jamming attacks;
   * Multiple instances of the App can be grouped into a cluster with a single control for simulating synchronous spoofing with multiple TX;
-  * Supports conducted connection to the device under test for lab testing and radiated for field testing.
+  * Supports conducted connection to the tested device for further lab testing and radiated connection for the further field testing;
-  * Synchronization accuracy with a life sky signal is not worse than 100 nanoseconds.
+  * Provides the synchronization accuracy with a life sky signal that is not worse than 100 nanoseconds;
-  * Allows to shift the time in three ways.
+  * Capable of adding various impairments to the signals like time\coordinates shift, satellite's relative power, pseudorange\Doppler offset, etc.;
-  * Allows to soft shift DUT coordinates.
+  * Can add various types of jamming to the signal like wideband noise, continuous wave, etc.;
-  * Add various impairments to the satellites signal like power offset, pseudorange offset and noise, Doppler offset and noise.
+  * Uses real almanac and ephemeris data.
-  * Add various types of jamming to the signal like wide band noise, continuous wave,
+\\
-  * Uses current almanac and ephemeris data.
-  * Uses the [[https://www.u-blox.com/en/product/evk-8evk-m8|Ublox M8T GNSS receiver]] to collect information about the observed satellites and time synchronization
+====Areas of Application====
+We have developed this application for testing our own [[https://gpspatron.com/|GNSS spoofing detection system]], as well as for researching various possible attack scenarios.\\
+**The application allows you to simulate simple and complex types of attacks**:
+  * [[https://gpspatron.com/chapter-1-asynchronous-spoofing-attacks/|Asynchronous]];
+  * Synchronous;
+  * Synchronous with multiple TX.
+**Security and Operational Benefits:**:
+  * Conduct comprehensive research in the field of spoofing detection and prevention methods;
+  * Test your existing infrastructure for spoofing vulnerabilities;
+  * Test the quality of our [[https://gpspatron.com/|spoofing detection system]].
+**All testing can be performed in the laboratory, as well as in the field.**
+\\
+====Quick Start====
+To start testing your device, take the following simple steps:
+  * Install the software on your computer device;
+  * Activate a license via [[AppManager:Patrotest Application Manager]];
+  * Connect [[https://www.ettus.com/product/category/USRP-Bus-Series|Ettus Research USRP]] with USB 3.0 interface;
+  * Connect [[https://www.u-blox.com/en/product/evk-8evk-m8|Ublox M8T GNSS receiver]] via USB and RS-232 port;
+  * Run the [[gp_simulator:NI-USRP Configuration Utility]] and set the name of your USRP to  "**usrp**."\\
+Run the GP-Simulator.\\
-====Application====
-We have developed this app for testing our own [[https://gpspatron.com/|GNSS spoofing detection system]] and for researching various attack scenarios.
-The application allows you to simulate simple and complex types of attacks:
-  * asynchronous
-  * synchronous
-  * synchronous with multiple TX
-This solution allows:
-  * conduct research in the field of anti-spoofing methods
-  * test your existing infrastructure for spoofing vulnerabilities
-  * test the quality of our [[https://gpspatron.com/|spoofing detection system]]
-All testing can be done both in the laboratory and in the field.
-====Quick start====
-You can start testing your device in three simple steps:
-  * install the software on your computer
-  * activate a license via [[AppManager:Patrotest Application Manager]]
-  * connect [[https://www.ettus.com/product/category/USRP-Bus-Series|Ettus Research USRP]] with USB 3.0 interface
-  * connect [[https://www.u-blox.com/en/product/evk-8evk-m8|Ublox M8T GNSS receiver]] via USB and RS-232 port
-  * run [[gp_simulator:NI-USRP Configuration Utility]] and set the name of your USRP (set - "usrp")\\
-  * Run the GP-Simulator
 {{:gp_simulator:gp-simulator_run.png?500|}}
-  * On UBLOX folder set the Ublox RS-232 port and wait 3D fix status
+\\
+In the "Init position" tab, click on "UBLOX Port" and select "Ublox RS-232 port" from the list. After that, wait for the "Status" to display "3D fix"\\
 {{:gp_simulator:gp-simulator_ublox_3d_fix.png?500|}}
-  * On Almanac & Ephemeris folder push Download button to load files. Internet is required
+\\
+In the "Almanac & Ephemeris" tab, click on the "Download Almanac and Ephemeris" button to load files. **NOTE**: Internet connection is required.\\
 {{:gp_simulator:gp-simulator_download_almanac.png?500|}}
-  * On USRP folder set the name: usrp. 10 MHz Ref to GPSDO, Spoofing Mode to Asynchronous, Conducted connection check box.
+\\
+In the "USRP" tab, set the following: **USRP name** to "**usrp**," **10 MHz Ref** to "**GPSDO**," "**Spoofing Mode**" to "**Asynchronous**," and then check the "Conducted connection" box respectively.\\
 {{:gp_simulator:gp-simulator_usrp_setup.png?500|}}
-  * On Start folder setup DUT input power to -25 dBm and push button Start Scenario
+\\
+In the "Start" tab, set "**DUT input power**" to "**-25 dBm**" and then click on the "Start Scenario" button.\\
 {{:gp_simulator:gp-simulator_quick_start_run.png?500|}}
-====Operation manual====
+\\
-[[gp_simulator:Operation manual|Operation manual link]]
+\\
+====Operation Manual====
+You can find the Operational Manual by following [[gp_simulator:Operation manual| this link]]
+\\
+====Evaluation Kit====
+<WRAP group>
+<WRAP half column>
+For a quick and effortless start, we offer our customers the **Evaluation Kit** which consists of the following equipment:
+  * Lenovo ThinkPad with the preinstalled software;
+  * [[https://www.ettus.com/product/details/UB200-KIT|Ettus Research USRP B200]] with GPSDO and additional shelldering;
+  * Directional coupler, two 30 dB attenuators and a SMA cable for conducted tests;
+  * [[https://www.u-blox.com/en/product/evk-8evk-m8|Ublox M8T GNSS receiver]] for live sky synchronization with a USB cable and USB\RS-232 adapter;
+  * All equipments is placed on a plastic panel;
+  * Evaluation Kit comes in the [[https://www.nanuk.com/nanuk-923-laptop.php|NANUK 923 protective case]].
+</WRAP>
+<WRAP half column>
+{{:gp_simulator:spoofer-kit4.jpg?direct&400 |}}
+</WRAP>
+</WRAP>
-====Evaluation kit====
-For a quick start, we offer our customers the Evolution Kit which consists of the following equipment:
-  * Lenovo ThinkPad with installed software.
-  * [[https://www.ettus.com/product/details/UB200-KIT|Ettus Research USRP B200]] with GPSDO and additional shelldering.
-  * Directional coupler, two 30 dB attenuators and SMA cable for conducted test.
-  * [[https://www.u-blox.com/en/product/evk-8evk-m8|Ublox M8T GNSS receiver]] for live sky synchronization with USB cable and USB\RS-232 adapter
-  * Equipments are placed on the plastic panel.
-  * Evolution Kit comes in a [[https://www.nanuk.com/nanuk-923-laptop.php|NANUK 923 protective case]].